| AWLS |
CONNECTION TYPE |
DRAIN |
| ASMM |
CONNECTION QUANTITY |
1 AND 1 AND 1 |
| ASAP |
SPLINE PITCH |
20/30 |
| AXFP |
DISPLACEMENT TYPE |
CONSTANT |
| APJC |
THREAD LOCATION |
INTERNAL AND INTERNAL AND INTERNAL |
| ABTJ |
MOUNTING HOLE QUANTITY |
4 |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS129 FSCM 77272 |
| AFFL |
MOUNTING BOLT CIRCLE DIAMETER |
5.000 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
HYDRAULIC SYSTEM AIRCRAFT |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AKCT |
SHAFT ROTATION DIRECTION |
COUNTERCLOCKWISE |
| ABUJ |
THREAD SIZE |
1.062-12 AND 0.875-14 AND 0.438-20 |
| AXFQ |
CONSTANT DISPLACEMENT PER REVOLUTION |
0.677 CUBIC INCHES |
| AXFN |
MOUNTING GOVERNMENT STANDARD |
AND10262 |
| AWLS |
CONNECTION TYPE |
OUTLET |
| AGJS |
PITCH DIAMETER |
0.800 INCHES NOMINAL |
| AJAB |
DRIVE SHAFT TYPE |
SPLINED, INVOLUTE EXTERNAL |
| ABSA |
SPLINE QUANTITY |
16 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| AXFB |
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE |
4000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND AND RIGHT-HAND |
| AZFE |
CONNECTION GOVERNMENT SPEC/STD |
AND10050-12 AND AND10050-10 AND AND10050-4 |
| AXFC |
CONNECTION DESIGN |
THREADED AND THREADED AND THREADED |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF AND UNF AND UNF |
| AAPL |
TORQUE LOAD RATING |
436.0 INCH-POUNDS |
| AAUH |
SPLINE MINOR DIAMETER |
0.685 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AEQC |
OPERATING SPEED AT RATED CAPACITY IN RPM |
8000.0 |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.862 INCHES MINIMUM AND 0.867 INCHES MAXIMUM |
| AZFH |
HOUSING SURFACE TREATMENT |
ANODIZED |
| ARQA |
SHAFT PROTRUSION LENGTH |
1.543 INCHES NOMINAL |
| AJLF |
HOUSING MATERIAL |
ALUMINUM ALLOY |
| AAXX |
MOUNTING TYPE |
FLANGE |
| AWLS |
CONNECTION TYPE |
INLET |
| AXFH |
SPLINE LENGTH |
1.000 INCHES NOMINAL |