| CLLZ |
SECOND PISTON ROD END LUBRICATION FACILITY (NON-CORE) |
NOT INCLUDED |
| CLMS |
PORT LOCATION AND QUANTITY |
1 CENTER SECTION |
| AAHB |
FIRST END OUTSIDE DIAMETER |
0.880 INCHES NOMINAL |
| CLMT |
PORT STYLE |
GASKET SEAL |
| AMDX |
FIRST END HOLE DIAMETER |
0.499 INCHES MINIMUM |
| ABMK |
OVERALL WIDTH |
3.600 INCHES NOMINAL |
| CKSF |
FIRST PISTON ROD END STYLE |
BEARING TYPE |
| ZZZV |
FSC APPLICATION DATA |
HYDRAULIC SYSTEM,AIRCRAFT |
| CLLQ |
SECOND PISTON ROD END STYLE |
FORK TYPE (CLEVIS) |
| AAFZ |
BODY MATERIAL |
STEEL |
| CLMK |
SECOND END FORK SPAN WIDTH |
0.562 INCHES MINIMUM |
| AMQZ |
COMPRESSED LENGTH |
27.200 INCHES NOMINAL |
| AMDX |
FIRST END HOLE DIAMETER |
0.500 INCHES MAXIMUM |
| AMPC |
FIRST END THICKNESS AT MOUNTING HOLES |
0.620 NOMINAL MILS |
| CLMK |
SECOND END FORK SPAN WIDTH |
0.567 INCHES MAXIMUM |
| CLLP |
PISTON ROD END SIMILARITY |
NOT IDENTICAL |
| AMPC |
FIRST END THICKNESS AT MOUNTING HOLES |
0.625 NOMINAL CENTIMETERS |
| BGST |
PRESSURE RATING |
2950.0 POUNDS PER SQUARE INCH MINIMUM AND 3000.0 POUNDS PER SQUARE INCH MAXIMUM |
| CKSD |
DESIGN CHARACTERISTICS |
DOUBLE ACTING SINGLE CYLINDER |
| AMGS |
SECOND END HOLE DIAMETER |
0.438 INCHES NOMINAL |
| CKRM |
INTEGRAL VALVE OPERATION METHOD |
HYDRAULIC |
| ABXV |
BORE DIAMETER |
2.250 INCHES NOMINAL |
| CLMS |
PORT LOCATION AND QUANTITY |
3 PISTON ROD END |
| ABJH |
TEMP RATING |
NOT RATED |
| CLLN |
FIRST PISTON ROD END LUBRICATION FACILITY (NON-CORE) |
NOT INCLUDED |
| CLMF |
SECOND END FORK WIDTH |
0.562 INCHES NOMINAL |
| ATEM |
EXTENDED LENGTH |
32.100 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DESIGNEDFOR RIGHT HAND APPLICATION |
| ABKW |
OVERALL HEIGHT |
4.469 INCHES NOMINAL |