| ASAP |
SPLINE PITCH |
20/40 |
| AXFP |
DISPLACEMENT TYPE |
CONSTANT |
| ABTJ |
MOUNTING HOLE QUANTITY |
4 |
| AZFG |
MOUNTING BOLT HOLE SPACING |
3.536 IN. BY 3.536 IN. |
| ARQA |
SHAFT PROTRUSION LENGTH |
0.966 INCHES NOMINAL |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AXFN |
MOUNTING GOVERNMENT STANDARD |
AND10261 |
| ABSA |
SPLINE QUANTITY |
12 |
| ASMM |
CONNECTION QUANTITY |
4 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AAUH |
SPLINE MINOR DIAMETER |
0.550 INCHES NOMINAL |
| AJAB |
DRIVE SHAFT TYPE |
SPLINED, INVOLUTE EXTERNAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.344 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AEQC |
OPERATING SPEED AT RATED CAPACITY IN RPM |
4310.0 |
| AXFC |
CONNECTION DESIGN |
THREADED |
| AGJS |
PITCH DIAMETER |
0.600 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF |
| AXFB |
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE |
3000PSI AT MINUS 65 DEG F TO PLUS 360 DEG F |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY SOURCE CONTROL DWG 65651-04027-101 FSCM 78286 |
| AXFH |
SPLINE LENGTH |
0.812 INCHES NOMINAL |
| ABUJ |
THREAD SIZE |
0.437-20 |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.650 INCHES NOMINAL |
| AAPL |
TORQUE LOAD RATING |
206.0 INCH-POUNDS |
| AJLF |
HOUSING MATERIAL |
STEEL |
| APJC |
THREAD LOCATION |
INTERNAL |
| AAXX |
MOUNTING TYPE |
FLANGE |
| AZFE |
CONNECTION GOVERNMENT SPEC/STD |
AND10050-4 |
| AWLS |
CONNECTION TYPE |
INLET |