| ASAP |
SPLINE PITCH |
20/30 |
| AXFP |
DISPLACEMENT TYPE |
CONSTANT |
| AZFG |
MOUNTING BOLT HOLE SPACING |
5.000 IN. C TO C |
| AWLS |
CONNECTION TYPE |
INLET AND OUTLET AND DRAIN |
| APJC |
THREAD LOCATION |
INTERNAL AND INTERNAL AND INTERNAL |
| ABTJ |
MOUNTING HOLE QUANTITY |
4 |
| ASMM |
CONNECTION QUANTITY |
1 AND 1 AND 2 |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AXFN |
MOUNTING GOVERNMENT STANDARD |
AND10261 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE AND COUNTERCLOCKWISE |
| AGJS |
PITCH DIAMETER |
0.800 INCHES NOMINAL |
| ABSA |
SPLINE QUANTITY |
16 |
| AXFH |
SPLINE LENGTH |
0.906 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
AIRCRAFT HYDRAULIC SYSTEM C141 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.344 INCHES NOMINAL |
| ARQA |
SHAFT PROTRUSION LENGTH |
1.120 INCHES NOMINAL |
| AAPL |
TORQUE LOAD RATING |
383.0 INCH-POUNDS |
| AXFQ |
CONSTANT DISPLACEMENT PER REVOLUTION |
0.803 CUBIC INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND AND RIGHT-HAND |
| AAUH |
SPLINE MINOR DIAMETER |
0.727 INCHES NOMINAL |
| ABUJ |
THREAD SIZE |
0.875-14 AND 0.875-14 AND 0.563-18 |
| AZFE |
CONNECTION GOVERNMENT SPEC/STD |
AND10050-10,AND10050-10 AND AND10050-6 |
| AXFM |
DRIVE SHAFT GOVERNMENT STANDARD |
AND10262 |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.867 INCHES NOMINAL |
| AEQC |
OPERATING SPEED AT RATED CAPACITY IN RPM |
3750.0 |
| AXFC |
CONNECTION DESIGN |
THREADED AND THREADED AND THREADED |
| AJAB |
DRIVE SHAFT TYPE |
SPLINED, INVOLUTE INTERNAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF AND UNF AND UNF |
| AXFB |
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE |
3000 PSI AT MINUS 65 DEG F TO PLUS 160 DEG F |
| AZFH |
HOUSING SURFACE TREATMENT |
ANODIZED |
| AJLF |
HOUSING MATERIAL |
ALUMINUM ALLOY |
| AAXX |
MOUNTING TYPE |
FLANGE |