| AXYS |
SPLINE TYPE |
INVOLUTE BOTH ENDS |
| CFRP |
CASING LENGTH BETWEEN FERRULES |
21.093 INCHES NOMINAL |
| CFSB |
CORE ROTATION DIRECTION |
CLOCKWISE OR COUNTERCLOCKWISE |
| CFRM |
TORSIONAL DEFLECTION RATING |
50 DEG FT-LB IN. TORSIONAL DEFLECTION IN WINDING DIRECTION,75 DEG FT-LB IN UNWINDING DIRECTION |
| AKMH |
CORE DIAMETER |
0.250 INCHES NOMINAL |
| AWZY |
END CONNECTION TYPE |
THREADED INTERNAL BOTH ENDS |
| ABUJ |
THREAD SIZE (NON-CORE) |
ERR-070 |
| APJC |
THREAD LOCATION |
INTERNAL BOTH ENDS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNS BOTH ENDS |
| ABSA |
SPLINE QUANTITY |
12 BOTH ENDS |
| ZZZV |
FSC APPLICATION DATA |
ACTUATOR INSTALLATION,OIL COOLER FLAP,AIRCRAFT |
| BJPS |
CASING MATERIAL |
STEEL |
| AGJS |
PITCH DIAMETER |
0.250 INCHES NOMINAL BOTH ENDS |
| CFRW |
END OVERALL DIAMETER |
0.875 INCHES NOMINAL BOTH ENDS |
| CFRQ |
CASING OUTSIDE DIAMETER |
0.445 INCHES NOMINAL |
| CFSM |
STRENGTH RATING CHARACTERISTICS (NON-CORE) |
20.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
| AJXJ |
CORE MATERIAL |
STEEL |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.310 INCHES NOMINAL BOTH ENDS |
| AXFH |
SPLINE LENGTH |
0.242 INCHES NOMINAL BOTH ENDS |
| ABHP |
OVERALL LENGTH |
22.093 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2A BOTH ENDS |
| ASDB |
WIDTH ACROSS FLATS |
0.750 INCHES NOMINAL BOTH ENDS |
| AEDN |
TIP LENGTH |
0.500 INCHES NOMINAL BOTH ENDS |
| CFRT |
SWIVEL END |
NOT PROVIDED BOTH ENDS |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
14.5 BOTH ENDS |
| ABSC |
SPLINE MINOR DIAMETER |
0.242 INCHES NOMINAL BOTH ENDS |
| CFRZ |
CORE OVERALL LENGTH |
21.529 INCHES NOMINAL |
| CGDN |
MINIMUM OPERATING RADIUS |
3.000 INCHES |
| CFSL |
CORE REMOVABILITY |
NONREMOVABLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND BOTH ENDS |
| AASA |
THREAD LENGTH |
0.281 INCHES NOMINAL BOTH ENDS |
| BDRL |
SETSCREW |
NOT INCLUDED BOTH ENDS |
| CFRY |
LUBRICATION FITTING |
NOT PROVIDED BOTH ENDS |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.406 INCHES CLEANING WIRE ANY ACCEPTABLE BOTH ENDS |
| BPPL |
WRENCHING FACILITY TYPE |
HEXAGON BOTH ENDS |
| APTD |
END TYPE |
ROUND, INTERNAL SPLINED BOTH ENDS |
| AECT |
THREAD DEPTH |
0.281 INCHES NOMINAL BOTH ENDS |