| CPTG |
FORWARD BEARING SLEEVE LENGTH |
2.250 FEET NOMINAL |
| CPJF |
FORWARD END KEYWAY |
NOT PROVIDED |
| AHSU |
COUPLING OUTSIDE DIAMETER |
35.500 INCHES NOMINAL |
| ABKV |
OUTSIDE DIAMETER |
20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| APQB |
UNIT TYPE |
LINE SHAFT SECTION |
| CPTF |
FORWARD BEARING SLEEVE OUTSIDE DIAMETER |
20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| BPJZ |
USAGE LOCATION |
PORT |
| ABHP |
OVERALL LENGTH |
30.088 FEET NOMINAL |
| AGYE |
SURFACE FINISH |
GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| CPHM |
FORWARD END DESIGN |
STRAIGHT |
| ABMZ |
DIAMETER |
20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| AARX |
INSIDE DIAMETER |
13.380 INCHES MINIMUM AND 13.560 INCHES MAXIMUM |
| CPTB |
COUPLING THICKNESS |
4.250 INCHES NOMINAL |
| ARQS |
CONSTRUCTION |
HOLLOW |
| CPTD |
THREADED AFTER END |
NOT INCLUDED |
| CPNK |
AFTER END COUPLING DESIGN |
INTEGRAL |
| CPJK |
FORWARD END COUPLING OUTSIDE DIAMETER |
35.500 INCHES NOMINAL |
| CPTC |
AFTER END DESIGN |
STRAIGHT |
| CPJH |
FORWARD END COUPLING DESIGN |
INTEGRAL |
| CPJM |
FORWARD END COUPLING THICKNESS |
4.250 INCHES NOMINAL |
| CPJG |
AFTER END KEYWAY |
NOT PROVIDED |
| CPNM |
COUPLING LENGTH |
0.354 FEET NOMINAL |
| CPNF |
THREADED FORWARD END |
NOT INCLUDED |
| CPTS |
COVERING LOCATION |
SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| MATL |
MATERIAL |
STEEL, MIL-S-23284, CLASS 3 |
| CPHX |
FORWARD END DIAMETER |
20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| CPTH |
AFTER BEARING SLEEVE OUTSIDE DIAMETER |
20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| CPTP |
AFTER BEARING SLEEVE LENGTH |
1.000 FEET NOMINAL |
| CPJL |
FORWARD END COUPLING LENGTH |
0.442 FEET NOMINAL |
| APZX |
PROTECTIVE COVERING TYPE |
COMPOSITION RUST PREVENTIVE |