| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.500 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.830 INCHES NOMINAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.900 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| ABPT |
SECOND STEP DIAMETER |
0.874 INCHES NOMINAL |
| ABVA |
UNTHREADED PORTION LENGTH |
0.132 INCHES NOMINAL |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
180.0 |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.900 INCHES NOMINAL |
| BCGM |
RECTIFIER LOCATION |
INTEGRAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
13 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE OR COUNTERCLOCKWISE |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ELEC |
VOLTAGE IN VOLTS |
24.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
3.947 INCHES MINIMUM AND 4.053 INCHES MAXIMUM |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
5.047 INCHES MINIMUM AND 5.151 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.514 INCHES MINIMUM AND 0.524 INCHES MAXIMUM |
| ABFF |
FURNISHED ITEMS |
COOLING FAN AND NUT |