| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
193.0 |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.897 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNF |
| ABPT |
SECOND STEP DIAMETER |
0.669 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.500 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
7.605 INCHES MINIMUM AND 7.929 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| ABVA |
UNTHREADED PORTION LENGTH |
0.750 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
164.0 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| ABFF |
FURNISHED ITEMS |
VOLTAGE REGULATOR |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM |