| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| AWDP |
THREAD DIAMETER |
0.669 INCHES NOMINAL |
| ABPT |
SECOND STEP DIAMETER |
0.669 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.660 INCHES MINIMUM AND 8.740 INCHES MAXIMUM |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BZRR |
THREAD SERIES |
UNS |
| AASA |
THREAD LENGTH |
0.500 INCHES NOMINAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
16 |
| ABFF |
FURNISHED ITEMS |
LOCKWASHER AND COOLING FAN AND NUT AND WOODRUFF KEY |
| AKCT |
SHAFT ROTATION DIRECTION |
COUNTERCLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| ABVA |
UNTHREADED PORTION LENGTH |
0.750 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.080 INCHES MINIMUM AND 7.160 INCHES MAXIMUM |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.750 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
180.0 |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.750 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| ELEC |
VOLTAGE IN VOLTS |
24.0 |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.750 INCHES NOMINAL |