| BZRR |
THREAD SERIES |
UNF |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
0.937 INCHES NOMINAL |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.062 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.320 INCHES NOMINAL |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| ABPT |
SECOND STEP DIAMETER |
0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| AASA |
THREAD LENGTH |
0.444 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
193.0 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.840 INCHES NOMINAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| ABVA |
UNTHREADED PORTION LENGTH |
0.795 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCGM |
RECTIFIER LOCATION |
SEPARATE |
| CFHL |
THREAD CLASS |
2A |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.127 INCHES NOMINAL |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.062 INCHES NOMINAL |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |