| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| AXHX |
GROUND POLARITY TYPE |
POSITIVE |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
6.938 INCHES MINIMUM AND 6.951 INCHES MAXIMUM |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
1050 |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
163.0 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
5000.0 |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
17.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
6.118 INCHES MINIMUM AND 6.131 INCHES MAXIMUM |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.313 INCHES NOMINAL |