| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
2.110 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNF |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
16 |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| ABPT |
SECOND STEP DIAMETER |
0.874 INCHES NOMINAL |
| ABVA |
UNTHREADED PORTION LENGTH |
1.320 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
180.0 |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| ABFF |
FURNISHED ITEMS |
LOCKWASHER AND NUT AND WOODRUFF KEY |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGM |
RECTIFIER LOCATION |
INTEGRAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| AASA |
THREAD LENGTH |
0.790 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| ABRR |
KEYWAY WIDTH |
0.156 INCHES NOMINAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.750 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.480 INCHES MINIMUM AND 8.560 INCHES MAXIMUM |
| CFHL |
THREAD CLASS |
2A |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE OR COUNTERCLOCKWISE |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.180 INCHES MINIMUM AND 7.260 INCHES MAXIMUM |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.451 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AFYS |
KEYWAY LENGTH |
0.750 INCHES NOMINAL |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.750 INCHES NOMINAL |