| BZRR |
THREAD SERIES |
UNF |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
1.344 INCHES NOMINAL |
| ELEC |
VOLTAGE IN VOLTS |
28.0 |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
180.0 |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.453 INCHES NOMINAL |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.243 INCHES MINIMUM AND 7.256 INCHES MAXIMUM |
| AFYS |
KEYWAY LENGTH |
0.562 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
2700 |
| TEST |
TEST DATA DOCUMENT |
19207-11640180 DRAWING |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
16 |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
4.125 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
7.681 INCHES MINIMUM AND 7.694 INCHES MAXIMUM |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
8000 |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
159.0 |
| ABVA |
UNTHREADED PORTION LENGTH |
1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| ABRR |
KEYWAY WIDTH |
0.250 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ABPT |
SECOND STEP DIAMETER |
0.874 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.750 INCHES NOMINAL |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| AASA |
THREAD LENGTH |
0.750 INCHES NOMINAL |
| BCGM |
RECTIFIER LOCATION |
SEPARATE |
| CFHL |
THREAD CLASS |
2A |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
4.125 INCHES NOMINAL |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
180.0 |