| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
4.875 INCHES NOMINAL |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
4.245 INCHES MINIMUM AND 4.255 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNF |
| ABSA |
SPLINE QUANTITY |
6 |
| AAUK |
SPLINE WIDTH |
0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
1000 |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.874 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| BCGT |
COTTER PIN HOLE |
INCLUDED |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
1000 |
| BCGS |
SHAFT DRIVE END STYLE |
SPLINED SHAFT END, THREADED |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM |
| ABFF |
FURNISHED ITEMS |
COOLING FAN AND DRIVE PULLEY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM |
| AAUH |
SPLINE MINOR DIAMETER |
ANY ACCEPTABLE |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
4.500 INCHES NOMINAL |
| BCMG |
TOP MOUNTING HOLE DIAMETER |
0.531 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
170.0 |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| AXFH |
SPLINE LENGTH |
2.000 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
10.0 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| AASA |
THREAD LENGTH |
0.844 INCHES NOMINAL |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
55.0 |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1000 |