| BZRR |
THREAD SERIES |
UNF |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
3000 |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
900 |
| AASA |
THREAD LENGTH |
0.500 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.500 INCHES NOMINAL |
| ABFF |
FURNISHED ITEMS |
OVERLOAD PROTECTIVE DEVICE |
| ELEC |
VOLTAGE IN VOLTS |
32.0 |
| AKCT |
SHAFT ROTATION DIRECTION |
COUNTERCLOCKWISE |
| ADER |
MOUNTING STYLE |
BODY MTD W/FOUR THREADED MTG HOLES |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| ABPT |
SECOND STEP DIAMETER |
0.750 INCHES NOMINAL |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1500 |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| ABVA |
UNTHREADED PORTION LENGTH |
0.750 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCGW |
DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER |
3.000 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| ADPY |
PILOT HEIGHT |
ANY ACCEPTABLE |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
5.0 |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
45.0 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
24 |
| ABRR |
KEYWAY WIDTH |
0.156 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.875 INCHES NOMINAL |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
90.0 |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| BCMK |
DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER |
6.000 INCHES NOMINAL |
| AFYS |
KEYWAY LENGTH |
0.750 INCHES NOMINAL |