| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
4000 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| ABVA |
UNTHREADED PORTION LENGTH |
0.720 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.378 INCHES NOMINAL |
| ABFF |
FURNISHED ITEMS |
COOLING FAN |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
149.0 |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.238 INCHES MINIMUM AND 8.256 INCHES MAXIMUM |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
1100 |
| ABPT |
SECOND STEP DIAMETER |
0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
31.0 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1800 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.118 INCHES MINIMUM AND 7.136 INCHES MAXIMUM |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.313 INCHES NOMINAL |