| AAUJ |
SPLINE MAJOR DIAMETER |
0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE OR POSITIVE |
| ZZZV |
FSC APPLICATION DATA |
ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
| BZRR |
THREAD SERIES |
UNF |
| ABSA |
SPLINE QUANTITY |
6 |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
100.0 |
| BCMK |
DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER |
7.812 INCHES NOMINAL |
| AAUK |
SPLINE WIDTH |
0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| AXFH |
SPLINE LENGTH |
1.625 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| BCGS |
SHAFT DRIVE END STYLE |
SPLINED SHAFT END, THREADED |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
NOT RATED |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
900 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF |
| BCGW |
DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER |
3.062 INCHES NOMINAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCGN |
GROUNDING METHOD |
EXTERNAL |
| AASA |
THREAD LENGTH |
0.750 INCHES NOMINAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
24 |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
130.0 |
| CFHL |
THREAD CLASS |
2A |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
55.0 |
| AAUH |
SPLINE MINOR DIAMETER |
0.690 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |