| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
2450 |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
7.438 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BZRR |
THREAD SERIES |
UNS |
| ABVA |
UNTHREADED PORTION LENGTH |
0.875 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
1000 |
| ABFF |
FURNISHED ITEMS |
OVERLOAD PROTECTIVE DEVICE |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
6.688 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.699 INCHES NOMINAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
8000 |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.375 INCHES NOMINAL |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
163.0 |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.328 INCHES NOMINAL |
| ABPT |
SECOND STEP DIAMETER |
0.699 INCHES NOMINAL |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
45.0 |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.812 INCHES NOMINAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCGN |
GROUNDING METHOD |
EXTERNAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ELEC |
VOLTAGE IN VOLTS |
6.0 |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
17.0 |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.188 INCHES NOMINAL |