| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
0.0 |
| BZRR |
THREAD SERIES |
UNF |
| ELEC |
VOLTAGE IN VOLTS |
28.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
6.631 INCHES MINIMUM AND 6.644 INCHES MAXIMUM |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
80.0 |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
50000 |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| AKCT |
SHAFT ROTATION DIRECTION |
COUNTERCLOCKWISE |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
4.430 INCHES MINIMUM AND 4.440 INCHES MAXIMUM |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
5000 |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
1.405 INCHES NOMINAL |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.627 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AHZV |
SUBMERSIBILITY |
SUBMERSIBLE |
| AWDP |
THREAD DIAMETER |
0.750 INCHES NOMINAL |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
1500 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF |
| ABVA |
UNTHREADED PORTION LENGTH |
1.220 INCHES MINIMUM AND 1.245 INCHES MAXIMUM |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| BCGM |
RECTIFIER LOCATION |
INTEGRAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
4.430 INCHES MINIMUM AND 4.440 INCHES MAXIMUM |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| AASA |
THREAD LENGTH |
0.750 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.131 INCHES MINIMUM AND 8.144 INCHES MAXIMUM |
| ABRR |
KEYWAY WIDTH |
0.156 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| ABPT |
SECOND STEP DIAMETER |
0.7794 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| AFYS |
KEYWAY LENGTH |
0.750 INCHES NOMINAL |