| AWDP |
THREAD DIAMETER |
0.669 INCHES NOMINAL |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
850 |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BZRR |
THREAD SERIES |
UNS |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
6.938 INCHES MINIMUM AND 6.951 INCHES MAXIMUM |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1250 |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
5000 |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
163.0 |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| ABVA |
UNTHREADED PORTION LENGTH |
0.780 INCHES NOMINAL |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.797 INCHES NOMINAL |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| ABPT |
SECOND STEP DIAMETER |
0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.060 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ABFF |
FURNISHED ITEMS |
VOLTAGE REGULATOR AND WOODRUFF KEY |
| ELEC |
VOLTAGE IN VOLTS |
6.0 |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
15.0 |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| AAJE |
THREAD PITCH DIAMETERS |
+0.6324/+0.6365 INCHES |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
6.118 INCHES MINIMUM AND 6.131 INCHES MAXIMUM |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
180.0 |