| BFLY |
GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION |
ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| ACDC |
CURRENT TYPE |
AC INPUT AND DC INPUT |
| CNXS |
POWER RATING |
0.0666 HORSEPOWER OUTPUT |
| AXCP |
WINDING TYPE |
SERIES WOUND |
| CWGQ |
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS |
115.0 LINE TO NEUTRAL SINGLE INPUT |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| BKPQ |
INCLOSURE SPECIFICATION |
COMMERCIAL |
| CWHK |
GEARED HEAD OUTPUT SHAFT SPEED RATING |
2.800 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 WIRE LEAD |
| BFMF |
COOLING METHOD |
AMBIENT AIR |
| CWFY |
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
3.625 INCHES |
| FREQ |
FREQUENCY IN HERTZ |
60.0 INPUT |
| BKPP |
SPEED CONTROL METHOD AND DEVICE TYPE |
AUTOMATIC MECHANICAL |
| BFMR |
KEYWAY CENTER TO SHAFT END DISTANCE |
0.7500 INCHES NOMINAL SINGLE END |
| CWHZ |
SHAFT END CHARACTERISTIC |
A11 SINGLE STYLE SINGLE END |
| ABWV |
SHAFT DIAMETER |
0.5000 INCHES NOMINAL SINGLE END |
| AAJV |
OVERALL WIDTH |
5.125 INCHES |
| FAAZ |
PHASE |
SINGLE INPUT |
| CBBL |
FEATURES PROVIDED |
VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWDT |
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.125 INCHES |
| BKPH |
TORQUE RATING AND TYPE |
450.0 INCH-POUNDS RUNNING |
| AAJT |
OVERALL HEIGHT |
4.875 INCHES |
| AKPS |
DUTY CYCLE |
CONTINUOUS |
| CWHR |
ANGLE OF SHAFT TO MOUNTING BASE |
90.0 DEGREES SINGLE END |
| AAJU |
OVERALL LENGTH |
8.750 INCHES |
| CWCS |
LENGTH OF SHAFT FROM HOUSING |
1.500 INCHES SINGLE END |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 UNTHREADED HOLE |
| CNMK |
WOODRUFF KEY SIZE DESIGNATION |
3 SINGLE END |
| ANPZ |
INCLOSURE FEATURE |
OPEN PROTECTED |
| CWDM |
SHAFT CENTER TO MOUNTING SURFACE DISTANCE |
2.625 INCHES SINGLE END |