| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.250 INCHES |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWRS |
BORE NOMINAL DIAMETER |
0.375 INCHES BOTH ENDS |
| AJLA |
TEETH QUANTITY |
60 |
| CWWN |
END NOMINAL DIAMETER |
0.625 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.500 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
1.8750 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.325 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL OVERALL |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.125 INCHES FIRST END |
| CQFM |
HARDNESS RATING |
34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.935 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI/SAE 4340 ASSN STD SINGLE MATERIAL RESPONSE OVERALL AND FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.164 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232 TYPE M,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWWH |
END NOMINAL LENGTH |
0.375 INCHES FIRST END |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 |
| CWNH |
TOOTH FORM |
STANDARD |