| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 12 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.8750 INCHES FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| AGJS |
PITCH DIAMETER |
1.9524 INCHES MINIMUM AND 1.9531 INCHES MAXIMUM |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AJLA |
TEETH QUANTITY |
125 |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.983 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.0625 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.2500 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.1875 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.5000 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.187 INCHES BOTH ENDS |
| CWNH |
TOOTH FORM |
STANDARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |