| AJLA |
TEETH QUANTITY |
92 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.148 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL COMP 303SE OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.094 INCHES BOTH ENDS |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.032 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.250 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.979 INCHES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| AGJS |
PITCH DIAMETER |
0.9580 INCHES NOMINAL |
| CWTX |
HUB NOMINAL DIAMETER |
0.180 INCHES SECOND END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303SE,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.080 INCHES SECOND END |