| CWRM |
FACE NOMINAL WIDTH |
0.095 INCHES |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.577 INCHES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.069 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWTX |
HUB NOMINAL DIAMETER |
0.375 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
0.5459 INCHES MINIMUM AND 0.5469 INCHES MAXIMUM |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END AND 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.200 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWFR |
NOMINAL OVERALL LENGTH |
0.295 INCHES |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
40 TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.187 INCHES BOTH ENDS |
| AJLA |
TEETH QUANTITY |
35 |
| CWNH |
TOOTH FORM |
STANDARD |