| CWNH |
TOOTH FORM |
STUB |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWFR |
NOMINAL OVERALL LENGTH |
2.144 INCHES |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
1.060 INCHES FIRST END |
| BDTX |
SPLINE PITCH DIAMETER |
0.6000 INCHES NOMINAL BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.984 INCHES FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.984 INCHES SECOND END |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
1.060 INCHES SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| ABSA |
SPLINE QUANTITY |
12 BOTH ENDS |
| FEAT |
SPECIAL FEATURES |
SPLINE MINOR NOM DIAMETER 0.550 IN. |
| CWRM |
FACE NOMINAL WIDTH |
0.434 INCHES |
| CWWH |
END NOMINAL LENGTH |
0.368 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.875 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.368 INCHES SECOND END |
| CWWN |
END NOMINAL DIAMETER |
0.875 INCHES SECOND END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.855 INCHES BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.848 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS BOTH ENDS |
| AGJS |
PITCH DIAMETER |
1.7500 INCHES NOMINAL |
| CWTG |
COUNTERBORE NOMINAL DIAMETER |
0.625 INCHES BOTH ENDS |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.122 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
1.390 INCHES BOTH ENDS |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.365 INCHES FIRST END |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.122 INCHES SECOND END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.365 INCHES SECOND END |
| MATT |
MATERIAL |
STEEL COMP E9310 OVERALL |
| AJLA |
TEETH QUANTITY |
35 |