| AGJS |
PITCH DIAMETER |
4.3310 INCHES MINIMUM AND 4.3330 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD66,AISI/SAE 1030 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| FEAT |
SPECIAL FEATURES |
YBORE UNDERCUT AT FIRST END OF HUB 0.250 IN. FROM END OF HUB,0.875 IN. LG BY 1.250 IN. DIA,FOUR SLOTS ON FIRST END OF HUB 0.094 IN. W BY 0.875 IN. DEEP,FACE OF GEAR CUTOUT 0.219 IN. RADIUS 210 DEG PLUS A 0.312 IN. RADIUS ON EA END LG |
| AJLA |
TEETH QUANTITY |
52 |
| CWRS |
BORE NOMINAL DIAMETER |
1.1260 INCHES BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
1.4970 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| CWRM |
FACE NOMINAL WIDTH |
0.500 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.875 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| MATT |
MATERIAL |
STEEL COMP 5155 OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
4.500 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |