| CWXG |
SECOND STEP NOMINAL LENGTH |
0.081 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
4.466 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
3.312 INCHES |
| AGJS |
PITCH DIAMETER |
4.3330 INCHES NOMINAL |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AJLA |
TEETH QUANTITY |
52 |
| CWWH |
END NOMINAL LENGTH |
0.432 INCHES FIRST END |
| CWXT |
THIRD STEP NOMINAL DIAMETER |
4.062 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.379 INCHES FIRST END |
| FEAT |
SPECIAL FEATURES |
PIN,TACOM P/N 7963254,WELDED INTO HOLE IN GEAR FACE1.782 IN.FROM GEAR CENTER.HOLE DIA 0.1875 IN. |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.312 INCHES SECOND END |
| MATT |
MATERIAL |
STEEL OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.312 INCHES |
| CQFM |
HARDNESS RATING |
34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWRS |
BORE NOMINAL DIAMETER |
0.706 INCHES BOTH ENDS |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
1.656 INCHES FIRST END |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS FIRST END |
| CWWN |
END NOMINAL DIAMETER |
1.250 INCHES FIRST END |
| BDTX |
SPLINE PITCH DIAMETER |
0.7000 INCHES NOMINAL BOTH ENDS |
| CWXP |
THIRD STEP NOMINAL LENGTH |
0.438 INCHES FIRST END |
| ABSA |
SPLINE QUANTITY |
14 BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.250 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.812 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |