| CWXB |
FIRST STEP NOMINAL DIAMETER |
5.500 INCHES SECOND END |
| MATT |
MATERIAL |
IRON CAST OVERALL |
| AGJS |
PITCH DIAMETER |
6.6250 INCHES NOMINAL |
| CWRS |
BORE NOMINAL DIAMETER |
0.625 INCHES BOTH ENDS |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
1.500 INCHES FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.031 INCHES FIRST END |
| BDTX |
SPLINE PITCH DIAMETER |
0.5625 INCHES NOMINAL BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
6.875 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.688 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
1.150 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
53 |
| ABSA |
SPLINE QUANTITY |
9 BOTH ENDS |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.156 INCHES SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.188 INCHES SECOND END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWRM |
FACE NOMINAL WIDTH |
0.500 INCHES |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.182 INCHES FIRST END |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.313 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.031 INCHES SECOND END |
| CWWN |
END NOMINAL DIAMETER |
1.250 INCHES SECOND END |
| CWNH |
TOOTH FORM |
STANDARD |
| CWWH |
END NOMINAL LENGTH |
1.000 INCHES FIRST END |