| CWWN |
END NOMINAL DIAMETER |
0.093 INCHES BOTH ENDS |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN AXIALLY THROUGH BODY, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWRM |
FACE NOMINAL WIDTH |
0.151 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.039 INCHES SECOND END |
| AJLA |
TEETH QUANTITY |
94 |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.031 INCHES AXIALLY THROUGH BODY, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.800 INCHES |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
0.187 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.188 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.062 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.040 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
0.7833 INCHES NOMINAL |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.056 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.125 INCHES BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.102 INCHES SECOND END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171,FINISH NO.5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| CWWH |
END NOMINAL LENGTH |
0.063 INCHES SECOND END |
| CWNH |
TOOTH FORM |
STANDARD |