| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.375 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.134 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
1.2159 INCHES MINIMUM AND 1.2166 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.149 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
146 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.232 INCHES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.060 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWWH |
END NOMINAL LENGTH |
0.015 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.171 INCHES SECOND END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.125 INCHES BOTH ENDS |
| CWWN |
END NOMINAL DIAMETER |
0.171 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.015 INCHES SECOND END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |