| CWWH |
END NOMINAL LENGTH |
0.125 INCHES SECOND END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.210 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.210 INCHES SECOND END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.434 INCHES SECOND END |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.375 INCHES AXIALLY THROUGH BODY, FIRST END |
| AJLA |
TEETH QUANTITY |
120 |
| AGJS |
PITCH DIAMETER |
1.6667 INCHES NOMINAL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWRM |
FACE NOMINAL WIDTH |
0.126 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.309 INCHES SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.375 INCHES FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
4 PLAIN AXIALLY THROUGH BODY, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303-CANCELED FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-764,TYPE 303SE-CANCELED FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.623 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.699 INCHES |
| CWWN |
END NOMINAL DIAMETER |
0.187 INCHES FIRST END |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
0.310 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.187 INCHES SECOND END |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.123 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWWH |
END NOMINAL LENGTH |
0.125 INCHES FIRST END |