| CWRM |
FACE NOMINAL WIDTH |
1.312 INCHES |
| AJLA |
TEETH QUANTITY |
19 |
| FEAT |
SPECIAL FEATURES |
COUNTERBORE SECOND END,DIA.1.500IN.NOMINAL,DEPTH 2.688IN.NOMINAL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| MATT |
MATERIAL |
STEEL COMP 8620H OVERALL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.357 INCHES |
| CWWN |
END NOMINAL DIAMETER |
1.969 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.375 INCHES SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
1.380 INCHES BOTH ENDS |
| CWWH |
END NOMINAL LENGTH |
1.031 INCHES FIRST END |
| CQFM |
HARDNESS RATING |
58.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| ABSA |
SPLINE QUANTITY |
21 BOTH ENDS |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.906 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
2.7142 INCHES NOMINAL |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
2.188 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
2.000 INCHES SECOND END |
| BDTX |
SPLINE PITCH DIAMETER |
1.3125 INCHES NOMINAL BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.937 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |