| CWTX |
HUB NOMINAL DIAMETER |
0.438 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.125 INCHES SECOND END |
| MATT |
MATERIAL |
STEEL COMP N OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN BOTH ENDS |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWRM |
FACE NOMINAL WIDTH |
0.188 INCHES |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.999 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.563 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.313 INCHES SECOND END |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.067 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END AND 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.188 INCHES BOTH ENDS |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
40 TRANSVERSELY THROUGH HUB, FIRST END |
| AGJS |
PITCH DIAMETER |
0.9375 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
46518,CL 6,TY A MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
30 |
| CWNH |
TOOTH FORM |
STANDARD |