| CWWS |
FIRST STEP NOMINAL LENGTH |
0.147 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 8640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CWFR |
NOMINAL OVERALL LENGTH |
0.875 INCHES |
| FEAT |
SPECIAL FEATURES |
HUB FIRST ENDS FROM GEAR BODY SIDE |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.112 INCHES |
| CWRM |
FACE NOMINAL WIDTH |
0.250 INCHES |
| CQFM |
HARDNESS RATING |
45.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWPP |
PRESSURE ANGLE |
30.0000 DEGREES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.078 INCHES SECOND END |
| AJLA |
TEETH QUANTITY |
17 |
| MATT |
MATERIAL |
STEEL COMP 8640 OVERALL |
| AGJS |
PITCH DIAMETER |
1.0625 INCHES NOMINAL |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.265 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWWN |
END NOMINAL DIAMETER |
0.250 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWWH |
END NOMINAL LENGTH |
0.375 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.312 INCHES BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.547 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.750 INCHES SECOND END |
| CWNH |
TOOTH FORM |
STANDARD |