| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.016 INCHES SECOND END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWWH |
END NOMINAL LENGTH |
0.195 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.061 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 COUNTERSUNK AXIALLY THROUGH BODY, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.042 INCHES |
| AGJS |
PITCH DIAMETER |
1.0000 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWTX |
HUB NOMINAL DIAMETER |
0.375 INCHES SECOND END |
| FEAT |
SPECIAL FEATURES |
1ST END HUB END HAS SETSCREW HOLE AND IS SPOT DRILLED FOR PINNING |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.750 INCHES FIRST END |
| CBBL |
FEATURES PROVIDED |
CASEHARDENED |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.094 INCHES AXIALLY THROUGH BODY, FIRST END |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
0.625 INCHES AXIALLY THROUGH BODY, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.256 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI 1211/SAE 1111 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
48 |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| CWRM |
FACE NOMINAL WIDTH |
0.094 INCHES |
| CWNH |
TOOTH FORM |
STANDARD |