| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.875 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
STEEL COMP 303SE BODY |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AGJS |
PITCH DIAMETER |
1.2170 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,ALLOY 2024,T3 FED SPEC SINGLE MATERIAL RESPONSE TEETH |
| CWFR |
NOMINAL OVERALL LENGTH |
0.375 INCHES |
| AJLA |
TEETH QUANTITY |
146 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.233 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| CWWN |
END NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BODY |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.063 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.125 INCHES BOTH ENDS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 TEETH |
| CWWH |
END NOMINAL LENGTH |
0.188 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
ANODIZE TEETH |
| CWNH |
TOOTH FORM |
STANDARD |