| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
1.408 INCHES AXIALLY THROUGH BODY, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171,CL3 MIL STD ALL TREATMENT RESPONSES OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.210 INCHES |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL OR PHOSPHATE ZINC OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, WITH LIGHTENING HOLES |
| AGJS |
PITCH DIAMETER |
3.0000 INCHES NOMINAL |
| CWQR |
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END |
0.050 INCHES SECOND END |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.405 INCHES FIRST END |
| CWSF |
NOMINAL RADIUS |
0.295 INCHES BOTH ENDS |
| CWSK |
NOMINAL DISTANCE FROM FLAT TO RADIAL CENTER |
0.224 INCHES BOTH ENDS |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| CWFR |
NOMINAL OVERALL LENGTH |
0.615 INCHES |
| CWWH |
END NOMINAL LENGTH |
0.045 INCHES FIRST END |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.196 INCHES AXIALLY THROUGH BODY, FIRST END |
| ANTP |
BORE STYLE |
D BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
2.610 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
5 PLAIN AXIALLY THROUGH BODY, FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.900 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
48 |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.360 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.760 INCHES SECOND END |
| STYL |
STYLE DESIGNATOR |
ONE PROTRUDING HUB, ONE RECESSED HUB |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.115 INCHES |
| CWNH |
TOOTH FORM |
STANDARD |