| CWRS |
BORE NOMINAL DIAMETER |
3.000 INCHES BOTH ENDS |
| CWQR |
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END |
0.250 INCHES SECOND END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWYD |
FIRST GROOVE NOMINAL DIAMETER |
4.250 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.500 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWMW |
TEETH TYPE |
SINGLE HELIX |
| CWPZ |
HELIX ANGLE |
14.9167 DEGREES |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWQR |
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END |
0.257 INCHES FIRST END |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, WITH LIGHTENING HOLES |
| AJLA |
TEETH QUANTITY |
82 |
| CWTX |
HUB NOMINAL DIAMETER |
4.500 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
4.500 INCHES SECOND END |
| CWXY |
FIRST GROOVE NOMINAL WIDTH |
0.125 INCHES FIRST END |
| CWSN |
KEYWAY NOMINAL WIDTH |
0.749 INCHES BOTH ENDS |
| AGJS |
PITCH DIAMETER |
16.4000 INCHES NOMINAL |
| CWRM |
FACE NOMINAL WIDTH |
3.000 INCHES |
| CWNM |
TOOTH DIRECTION |
LEFT |
| MATT |
MATERIAL |
STEEL OVERALL |
| ANTP |
BORE STYLE |
ERR-090 BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890,ALLOY NO. 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
16.683 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 GROOVE FIRST END |
| CQFM |
HARDNESS RATING |
92.0 ROCKWELL C NOMINAL OVERALL |
| CWSR |
NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM |
1.7135 INCHES BOTH ENDS |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
13 TRANSVERSELY THROUGH HUB, FIRST END |
| STYL |
STYLE DESIGNATOR |
RECESSED HUBS |
| CWYL |
NOMINAL DISTANCE FROM END TO FIRST GROOVE |
0.375 INCHES FIRST END |
| FEAT |
SPECIAL FEATURES |
BORE CHAMFERED 1/16 IN. BY 45 DEG BOTH ENDS |
| CWNH |
TOOTH FORM |
STANDARD |