| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.875 INCHES |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CQFM |
HARDNESS RATING |
24.0 ROCKWELL C MINIMUM OVERALL AND 30.0 ROCKWELL C MAXIMUM OVERALL |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| AGJS |
PITCH DIAMETER |
3.1250 INCHES NOMINAL |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.187 INCHES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| MATT |
MATERIAL |
STEEL OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| AJLA |
TEETH QUANTITY |
75 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890,ALLOY 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| CWRS |
BORE NOMINAL DIAMETER |
0.499 INCHES BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
0.875 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.875 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.206 INCHES |
| CWTX |
HUB NOMINAL DIAMETER |
0.750 INCHES SECOND END |
| CWNH |
TOOTH FORM |
STANDARD |