| CWTX |
HUB NOMINAL DIAMETER |
1.0000 INCHES BOTH ENDS |
| BDTX |
SPLINE PITCH DIAMETER |
0.7188 INCHES NOMINAL BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171,FINISH NO. 5.3.1.2 OR 5.3.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN BOTH ENDS |
| CWRM |
FACE NOMINAL WIDTH |
0.430 INCHES |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, WITH LIGHTENING HOLES |
| AJLA |
TEETH QUANTITY |
32 |
| AGJS |
PITCH DIAMETER |
0.2618 INCHES NOMINAL |
| CWRS |
BORE NOMINAL DIAMETER |
0.7327 INCHES BOTH ENDS |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.8255 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.3100 INCHES FIRST END |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 9 |
| STYL |
STYLE DESIGNATOR |
ONE PROTRUDING HUB, ONE RECESSED HUB |
| CWQR |
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END |
0.0450 INCHES SECOND END |
| ABSA |
SPLINE QUANTITY |
23 BOTH ENDS |
| CWNH |
TOOTH FORM |
STANDARD |