| CWRS |
BORE NOMINAL DIAMETER |
3.3475 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
8.0 ROCKWELL C NOMINAL OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWMW |
TEETH TYPE |
SINGLE HELIX |
| CWPZ |
HELIX ANGLE |
14.9167 DEGREES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.750 INCHES FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.375 INCHES BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
13.6857 INCHES |
| MATT |
MATERIAL |
STEEL COMP 1035 OVERALL |
| AAQL |
BODY STYLE |
WEBBED, WITH LIGHTENING HOLES |
| AGJS |
PITCH DIAMETER |
13.4000 INCHES NOMINAL |
| CWRM |
FACE NOMINAL WIDTH |
2.500 INCHES |
| CWNM |
TOOTH DIRECTION |
LEFT |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| FEAT |
SPECIAL FEATURES |
7COUNTERWEIGHT AND RIVETS,FIG 4 77 DEG 34 MIN FROM CENTER LINE ON SIDE OF GEAR FACE 2ND END,FIG 3 67 DEG 10 MIN FROM @FIG 4,4 0.500-20 @THD HOLES ON FACE OF HUB 2ND END,HUB DRILLED FOR LUBRICATION,ONE GROOVE 4.870 IN. DIA,0.500 IN. W ON HUB 2ND END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
6.500 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
1.6250 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
5.3715 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| AJLA |
TEETH QUANTITY |
67 |
| CWNH |
TOOTH FORM |
STANDARD |