| CQFM |
HARDNESS RATING |
10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
2.0000 INCHES BOTH ENDS |
| AGJS |
PITCH DIAMETER |
10.8000 INCHES NOMINAL |
| CWTX |
HUB NOMINAL DIAMETER |
2.997 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
2.997 INCHES SECOND END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN BOTH ENDS |
| CWMW |
TEETH TYPE |
SINGLE HELIX |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWRM |
FACE NOMINAL WIDTH |
2.000 INCHES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
11.084 INCHES |
| AAQL |
BODY STYLE |
WEBBED, WITH LIGHTENING HOLES |
| CWNM |
TOOTH DIRECTION |
LEFT |
| MATT |
MATERIAL |
STEEL OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.688 INCHES BOTH ENDS |
| AJLA |
TEETH QUANTITY |
54 |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| FEAT |
SPECIAL FEATURES |
TWO COUNTERWEIGHTS AND RIVETS,ONE PLUG,OIL HOLES IN HUB,FIG 6 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 9 DEG 3 MIN TO RIGHT OF LOWER VERTICAL CENTER LINE,FIG 5 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 75 DEG 20 MIN CW FROM FIG 6 |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWPZ |
HELIX ANGLE |
27.3217 DEGREES |
| CWNH |
TOOTH FORM |
STANDARD |