| CWNH |
TOOTH FORM |
STUB |
| CWPP |
PRESSURE ANGLE |
45.0000 DEGREES |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.837 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.090 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.080 INCHES FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
80 TRANSVERSELY THROUGH HUB, FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWWN |
END NOMINAL DIAMETER |
0.375 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.010 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWRS |
BORE NOMINAL DIAMETER |
0.313 INCHES BOTH ENDS |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.060 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
65 |
| AGJS |
PITCH DIAMETER |
0.8115 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| CWRM |
FACE NOMINAL WIDTH |
0.070 INCHES |