| CWYD |
FIRST GROOVE NOMINAL DIAMETER |
0.203 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.216 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.287 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.120 INCHES BOTH ENDS |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWRM |
FACE NOMINAL WIDTH |
0.252 INCHES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| MATT |
MATERIAL |
STEEL UNS K24065 OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| AGJS |
PITCH DIAMETER |
0.2500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWTX |
HUB NOMINAL DIAMETER |
0.250 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CQFM |
HARDNESS RATING |
84.0 ROCKWELL SUPERFICIAL 30-N MINIMUM TEETH |
| CWYL |
NOMINAL DISTANCE FROM END TO FIRST GROOVE |
0.154 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
1 GROOVE FIRST END |
| AJLA |
TEETH QUANTITY |
16 |
| CWNH |
TOOTH FORM |
STANDARD |
| CWXY |
FIRST GROOVE NOMINAL WIDTH |
0.062 INCHES FIRST END |