| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES COUNTERBORE, FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.280 INCHES |
| AJLA |
TEETH QUANTITY |
80 |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| ANTP |
BORE STYLE |
W/COUNTERBORE COUNTERBORE, FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWTG |
COUNTERBORE NOMINAL DIAMETER |
0.375 INCHES COUNTERBORE, FIRST END |
| AGJS |
PITCH DIAMETER |
1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.204 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| CWTB |
COUNTERBORE NOMINAL DEPTH |
0.078 INCHES COUNTERBORE, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |