| AJLA |
TEETH QUANTITY |
42 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.457 INCHES |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.217 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-465,ALLOY 642 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
0.4365 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM |
| MATT |
MATERIAL |
COPPER ALLOY 642 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| FEAT |
SPECIAL FEATURES |
SPLIT TYPE HUB WITH A 0.035 IN. WIDE BY 0.010 IN. DEEP GROOVE LOCATED 0.121 IN. FROM END OF HUB |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.199 INCHES FIRST END |
| ABSX |
ATTACHMENT METHOD |
CLAMP |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWFR |
NOMINAL OVERALL LENGTH |
0.420 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.355 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWWN |
END NOMINAL DIAMETER |
0.187 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.156 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.125 INCHES BOTH ENDS |
| CWRM |
FACE NOMINAL WIDTH |
0.065 INCHES |
| CWNH |
TOOTH FORM |
STANDARD |