| CWWN |
END NOMINAL DIAMETER |
0.1244 INCHES SECOND END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.009 INCHES SECOND END |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.113 INCHES SECOND END |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.040 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.030 INCHES COUNTERBORE, FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWRM |
FACE NOMINAL WIDTH |
0.127 INCHES |
| CWTB |
COUNTERBORE NOMINAL DEPTH |
0.197 INCHES COUNTERBORE, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END |
| CWTG |
COUNTERBORE NOMINAL DIAMETER |
0.203 INCHES COUNTERBORE, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.359 INCHES |
| ANTP |
BORE STYLE |
W/COUNTERBORE COUNTERBORE, FIRST END |
| AGJS |
PITCH DIAMETER |
0.3281 INCHES NOMINAL |
| CWTX |
HUB NOMINAL DIAMETER |
0.280 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWWH |
END NOMINAL LENGTH |
0.104 INCHES SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.161 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.195 INCHES SECOND END |
| AJLA |
TEETH QUANTITY |
21 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |