| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.125 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.073 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM TEETH AND 32.0 ROCKWELL C MAXIMUM TEETH |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AJLA |
TEETH QUANTITY |
60 |
| CWRM |
FACE NOMINAL WIDTH |
0.031 INCHES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.482 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| AGJS |
PITCH DIAMETER |
0.4652 INCHES MINIMUM AND 0.4667 INCHES MAXIMUM |
| CWFR |
NOMINAL OVERALL LENGTH |
0.156 INCHES |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
72 TRANSVERSELY THROUGH HUB, FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
0.218 INCHES FIRST END |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM HUB AND 32.0 ROCKWELL C MAXIMUM HUB |
| CWRS |
BORE NOMINAL DIAMETER |
0.093 INCHES BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 416 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |