| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.125 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.0470 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.234 INCHES SECOND END |
| CWRM |
FACE NOMINAL WIDTH |
0.156 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.469 INCHES |
| MATT |
MATERIAL |
COPPER ALLOY OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWMW |
TEETH TYPE |
STRAIGHT |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.500 INCHES SECOND END |
| CWQD |
PITCH ANGLE |
45.0000 DEGREES |
| AJLA |
TEETH QUANTITY |
24 |
| CWPP |
PRESSURE ANGLE |
14.4999 DEGREES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B16,1/2H NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES SECOND END |
| AGJS |
PITCH DIAMETER |
0.7812 INCHES NOMINAL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.8594 INCHES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWWN |
END NOMINAL DIAMETER |
0.313 INCHES SECOND END |
| CWWH |
END NOMINAL LENGTH |
0.016 INCHES SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.187 INCHES BOTH ENDS |
| STYL |
STYLE DESIGNATOR |
PERIPHERAL FACE, BACK HUB PROTRUDING |